Menu

Ink Jet

Signolit SIVN

White glossy, nano pigmented self-adhesive PVC film with paper backing. Ideal for stickers, signs, decals and mock-ups. It sticks to most clean surfaces.

Printing Systems



Cut sheets

Art. NumberThicknessFormatPacking quantity
22VN0.100.440000.130 mmDIN A4100 sheetsPDF
22VN0.100.447000.130 mmDIN A4250 sheetsPDF
22VN0.100.431000.130 mmDIN A340 sheetsPDF

Technical data

Characteristic

  • High brillance of colours
  • Permanent self adhesive
  • Fast Ink Drying
  • Universal use

Finish

  • self-adhesive with paper backing
  • White glossy

Specifications

Release linersiliconized paper ~ 0.145 mm
Coating Printsidenanoporous, white glossy
Width (mm)210
Thickness base material with toner coating0.130 mm
FormatDIN A4
Adhesion strength>/= 3.5 N, after 24 h >/= 10 N
Type of adhesivedispersion acrylic resin
Length (mm)297
Base Materialcalendered monomeric plasticized PVC, 0.100 mm
Total thickness0.285 mm
Packing quantity 100 sheets

Compatibility

  • For use on most Small Format Ink Jet Printers such as: HP, Canon, Epson, Apple, Digital, Kodak, Lexmark, Olivetti, Tektronix, Xerox, etc.

Handling

  • Before printing: To avoid damage to the print surface (fingerprints, scratch marks), we recommend wearing cotton gloves during processing.
  • After Printing: The film surface immediately feels dry after printing. However, we recommend leaving the printed film open for about 30 minutes after printing. If the prints will laminated, the drying time should be 1 hour or more.
  • Laminating: The printed surface must be protected with foils for cold lamination if it is subject to humidity, sweaty hands, abrasion or any other influences.
    For a short term outdoor use, SIVN must be always protectd with a 5 mm overlapping lamination.
  • Adhesion: SIVN will stick to any solid, smooth surfaces which are dry and free of dirt, grease, silicon etc. Before gluing it is absolutely necessary to check that the surface is appropriate to this aim and that it has been prepared (cleaned) professionally. During gluing the temperature must reach at least 15°C. You can remove SIVN by heating the film’s surface with a hot air gun. Then pull it off carefully.

Storage

  • Shelf life: 1 year after delivery
  • Store in a cool and dry place

Downloads (PDF)