Toner Color

Label Laser PET Clear P

Permanent acrylic self-adhesive polyester film with a paper release liner. Ideal for stickers, signs and decals. It is tear resistant and can be used in internal or external conditions. The imaged film has outstanding toner bonding and water resistance.

Printing Systems

Rolls

Art. Number	Width (mm)	Thickness	Length (m)
38042.050.09125	1200	0.050 mm	bulk roll

Technical data

Characteristic

High brillance of colours
Good scratch resistance
Tear resistant
Universal use
Weather proof prints

Finish

Clear glossy
self-adhesive with paper backing

Specifications

Release liner	siliconized paper
Width (mm)	1200
Thickness of carrier material	0.050 mm
Adhesion strength	~ 3.5 - 5.0 N / 25 mm (A.F.E.R.A.), after 24 h ~ 10 N / 25 mm (A.F.E.R.A.)
Type of adhesive	dispersion
Length (m)	bulk roll
Roll width / Roll usable width	Please contact Folex if you need other roll widths and roll lengths. We can convert the rolls according to your wishes.
Temperature range	glued +5°C up to +80°C
Base Material	PET film
Total thickness	0.150 mm

Compatibility

Suitable for most toner-based label roll printers.

Handling

Printing:
Before printing, the film has to be conditioned in the print room to equalize the temperature of the material on the room temperature. Please note dependant on climatic conditions the film may exhibit a little more static at the output tray which may require monitoring.
Gluing:
All even, smooth surfaces which are dry and free of dirt, grease, silicon etc. can be adhered. If applied onto curved surfaces please be aware that label lift off can occur especially if the radius is tight. It is up to the user to test for there own suitability/application, due to the wide variety of surfaces, applications & desired results. Gluing on low-energy surfaces such as LDPE, PE or PP will be not recommended. Adhesion temperature at least 15° C.
Durability:
The durability of the glued label is heavily influenced by the prevailing ambient conditions, the place of use and the bases!