Silver Films
Folex Digiprint-IG/SIK
Specially coated polyester film for Electro Ink with a silver metallic surface. The film is heat stabilized for good flatness properties and the coating offers excellent ink transfer and bonding for consistent image performance.
Cut sheets
| Art. Number | Format | Nominal thickness (mm) | Packing quantity |
|---|
| 06905.100.84500 | SRA3 | 0.100 | 200 |  |
Technical data
Characteristic
- Superb ink adhesion and image transfer
- Easy storage
- Excellent dimensional stability
- Suitable for short and long runs
- Officially approved by HP Indigo test centre
- Tear resistant
- Consistent performance
- Dedicated coating for Indigo Electro Ink
- No limited shelf life
- Splash resistant
Finish
- Paper backed short side
- Silver metallic glossy
Specifications
| Coating Printside | HP Indigo Electro Ink |
| Width (inch) | 12.6 |
| Width (mm) | 320 |
| Printside | Special reactive coating for toner |
| Format | SRA3 |
| Length (inch) | 17.72 |
| Length (mm) | 450 |
| Nominal thickness (mil) | 4 |
| Nominal thickness (mm) | 0.100 |
| Backside | Paperbacked short side |
| Total Thickness (mil) | 7.04 |
| Total Thickness (mm) | 0.176 |
| Base Material | Polyester film |
| Packing quantity | 200 |
Compatibility
- Suitable for Digital Presses from HP Indigo
- Not compatible with dry toner Digital Presses. (See Folex Digiprint-XE and -NX series).
Handling
- A preconditioning period of 24 hours within the printing environment is recommended.
- Please carefully follow the handling instructions supplied with this product as well as the press manufacturers manual.
- No special handling required.
- Avoid fingerprints on printing side.
Storage
- Shelf life: 1 year after delivery
- Store in the closed original packaging in a cool and dry place at a room temperature of 15 - 25°C and at a humidity of 30 - 60%.
Downloads (PDF)
