Toner Color

Label Laser PET Silver P

Permanent acrylic self-adhesive polyester film with a paper release liner. Ideal for stickers, signs and decals. It is tear resistant and can be used in internal or external conditions. The imaged film has outstanding toner bonding and water resistance.

Printing Systems


Art. NumberWidth (mm)ThicknessLength (m)
38050.050.0912512000.070 mmbulk rollPDF

Technical data


  • High brillance of colours
  • Good scratch resistance
  • Tear resistant
  • Universal use
  • Weather proof prints


  • self-adhesive with paper backing
  • Silver glossy


Release linersiliconized paper
Width (mm)1200
Thickness of carrier material 0.070 mm
Adhesion strength~ 3.5 - 5.0 N / 25 mm (A.F.E.R.A.), after 24 h ~ 10 N / 25 mm (A.F.E.R.A.)
Type of adhesivedispersion
Length (m)bulk roll
Roll width / Roll usable width Please contact Folex if you need other roll widths and roll lengths. We can convert the rolls according to your wishes.
Temperature rangeglued +5°C up to +80°C
Base MaterialPET film
Total thickness0.158 mm


  • Suitable for most toner-based label roll printers.


  • Printing:
    Before printing, the film has to be conditioned in the print room to equalize the temperature of the material on the room temperature. Please note dependant on climatic conditions the film may exhibit a little more static at the output tray which may require monitoring.
  • Surface protection:
    The labels can be adhered outdoors without lamination. However, the surface should be protected to improve weathering resistance or if the surface of the film is subject to mechanical influences. We recommend that you use self-adhesive laminating foils for this purpose. If silicon oil is added depending on the type of the machine, this may impair the adherence of the laminating foil on the film's surface. This should be tested before further processing on a sample sheet.
  • Gluing:
    All even, smooth surfaces which are dry and free of dirt, grease, silicon etc. can be adhered. If applied onto curved surfaces please be aware that label lift off can occur especially if the radius is tight. It is up to the user to test for there own suitability/application, due to the wide variety of surfaces, applications & desired results. Gluing on low-energy surfaces such as LDPE, PE or PP will be not recommended. Adhesion temperature at least 15° C.
  • Durability:
    The durability of the glued label is heavily influenced by the prevailing ambient conditions, the place of use and the bases!


  • Shelf life: 1 year after delivery
  • In its original packing at 20-25°C, 45-55% humidity.

Downloads (PDF)